Construction details : An electrical comparator consists of the following three major parts such as Transducer Display device as meter Amplifier Transducer : An iron armature is provided in between two coils held by a leaf...
Category - Education
Petrol vapours from fuel tank escape into atmosphere by evaporation (or breathing). This vapour comes out through filter cap vent or the tank vent tube. When the engine is not running, petrol will evaporative emission control...
Advantages of Stirling engines They can run directly on any available heat source, not just one produced by combustion, so they can run on heat from solar, geothermal, biological, nuclear sources or waste heat from industrial...
In S.I engine, the knocking occurs at the end of combustion whereas in C.I engine knocking occurs at the very beginning of combustion. The detonation in the S.I engine is of a homogeneous charge causing very high rate of pressure...
In petrol engines, a carburetor is employed to mix air and fuel supply system in the desired ratio. But in diesel engines, air alone is compressed in the cylinder. The high pressure is about 35 to 40bar and the temperature of...
A design of transformers consists of two windings coupled through a magnetic medium. The two windings work at different voltage level. The two windings of the transformer are called High voltage winding and Low voltage winding...
It is likely that we discover later, the previously allocated memory is not sufficient and we need additional space for more elements. It is also possible that the memory allocated is much larger than necessary and we want to...
Surveillance generally refers to monitoring or observing a person or a group of people from a certain distance, frequently, although not necessarily, comprising the use of electronic equipment and/or other technological devices...
Engineering design is a complex process which involves interaction between many skills and discipline. In traditional design, the components are designed through mechanical, hydraulic or pneumatic components and principles. But...
The mechatronics system design process consists of the following stages. Stage 1: Need for design The mechatronics system design process begins with a need. Needs are usually arise from dissatisfaction with an existing situation...
