The Teche

Education Tips

  • Facebook
  • Twitter
  • Google Plus
  • Home
  • Education
  • Computer Science
  • Electrical
  • Mechanical
  • Microprocessor
  • Question & Answers

Archive - February 2021

Battery Ignition System
  • Mechanical

Battery Ignition System or Coil System

February 27, 2021
by Santhakumar Raja
3 min read
Add Comment

It is employed in petrol engines. Fig shows the wiring diagram of a simple coil battery ignition system of a four cylinder engine. This system is used in automobiles. Construction: It consists of a battery, ignition coil...

Continue reading

Magneto ignition system
  • Mechanical

Magneto Ignition System Advantages and Disadvantages

February 27, 2021
by Santhakumar Raja
3 min read
Add Comment

In magneto ignition system, the battery is replaced with a magneto. Fig. shows the wiring diagram of a magneto ignition system. It consists of a switch, magneto, contact breaker, condenser, distributor and spark plugs. This...

Continue reading

Systematic and Random Errors in Measurement
  • Mechanical

Systematic and Random Errors in Measurement

February 26, 2021
by Santhakumar Raja
3 min read
Add Comment

Systematic and Random Errors in Measurement Systematic error is usually divided into two different categories: Instrumental errors Environmental errors Instrumental error : These errors are due to shortcomings of the...

Continue reading

Errors in Measurement
  • Mechanical

Errors in Measurement – and Types of Error

February 26, 2021
by Santhakumar Raja
4 min read
Add Comment

Errors in measurement = Measured Value – True value Error is the different between the measured value and the true value. The errors in measurement can be expressed either as an absolute error or an relative error. Absolute...

Continue reading

Types of Carburetor
  • Mechanical

Types of Carburetor and Working, Defects

February 25, 2021
by Santhakumar Raja
4 min read
Add Comment

The types of carburetor can be classified according to the following considerations. Carburetors are used almost all SI engine for the preparation of combustible air fuel mixture as a charge. Types of carburetor are : According...

Continue reading

Two Stroke Cycle Engine
  • Mechanical

Two Stroke Cycle Engine Working – S.I Engine

February 25, 2021
by Santhakumar Raja
5 min read
Add Comment

In two stroke cycle engine, one working cycle is completed in two strokes of the piston (one up and down movement) or one revolution of the crankshaft. Hence, it is called as two stroke engines. One working cycle consists of the...

Continue reading

4 Stroke Cycle Engines
  • Mechanical

4 Stroke Cycle Engines Working – S.I Engine

February 24, 2021
by Santhakumar Raja
4 min read
Add Comment

In 4 stroke cycle engines, one working cycle is completed in four stroke of the piston or two revolution of the crankshaft. Hence, it is called as four stroke engine. In 4 stroke engine, 2 valves are placed instead of port as...

Continue reading

Internal Combustion Engines
  • Mechanical

Internal Combustion Engines – IC Engines

February 24, 2021
by Santhakumar Raja
6 min read
Add Comment

The Internal Combustion engines (I.C engine) is a heat engine that converts chemical energy of fuel into mechanical energy. Chemical energy of a fuel is first converted into thermal energy by means of combustion or oxidation with...

Continue reading

Measuring Instruments - Liquid level indicator
  • Mechanical

Measuring Instruments- Spring Balance and Beam Balance

February 23, 2021
by Santhakumar Raja
6 min read
Add Comment

Large number and variety of variables are involved in measurement in practice. These variables may be constant with time or time varying. Measurement of the weight of an object is the example of time constant measurement. The...

Continue reading

Metric System of Measurement - Generalized Measuring System
  • Mechanical

Metric System of Measurement – Generalized Measuring System

February 23, 2021
by Santhakumar Raja
9 min read
Add Comment

Measurement is a comparison of a given unknown quantity with one of its predetermined standard values adopted as a unit. Metric system of measurement provides us with means of describing various phenomena in quantitative terms...

Continue reading

1 2 3 4 Next

Categories

  • Communications
  • Computer Science
  • Education
  • Electrical
  • Health Science
  • Law
  • Management
  • Mechanical
  • Microcontroller
  • Microprocessor
  • Question & Answers
  • Robotics

Ads

Recent Posts

  • Cellular/Cell-Mediated/T-Cell Immunity
  • Application of rDNA Technology and Genetic Engineering the Production of Insulin
  • Application of rDNA Technology and Genetic Engineering in the Production of Interferon
  • Applications of rDNA Technology and Genetic Engineering in Medicine
  • Techniques Used in Recombinant DNA Technology
  • Expression of Cloned Gene Within the Host
  • Hybrid Released Translation (HRT) Method
  • Colony Hybridisation (or Nucleic Acid Hybridisation) by Replica Plate Method

Featured Posts

  • Cellular/Cell-Mediated/T-Cell Immunity
    by Santhakumar Raja
  • Application of rDNA Technology and Genetic Engineering the Production of Insulin
    by Santhakumar Raja
  • Application of rDNA Technology and Genetic Engineering in the Production of Interferon
    by Santhakumar Raja
  • Applications of rDNA Technology and Genetic Engineering in Medicine
    by Santhakumar Raja
  • Techniques Used in Recombinant DNA Technology
    by Santhakumar Raja
  • Expression of Cloned Gene Within the Host
    by Santhakumar Raja
  • Hybrid Released Translation (HRT) Method
    by Santhakumar Raja
  • Colony Hybridisation (or Nucleic Acid Hybridisation) by Replica Plate Method
    by Santhakumar Raja
February 2021
S M T W T F S
 123456
78910111213
14151617181920
21222324252627
28  
« Jan   Mar »
Copyright © 2023. Created by Meks. Powered by WordPress.
  • Home
  • About Me
  • Contact Us
  • Privacy Policy
  • Home
  • Education
  • Computer Science
  • Electrical
  • Mechanical
  • Microprocessor
  • Question & Answers
  • Facebook
  • Twitter
  • Google Plus